§ 151.2060 § 151.2060 Reporting requirements.
(a)Ballast water reporting requirements exist for each vessel subject to this subpart bound for ports or places of the United States regardless of whether a vessel operated outside of the Exclusive Economic Zone (EEZ), unless exempted in § 151.2015 of this subpart.
(b)The master, owner, operator, agent, or person in charge of a vessel subject to this subpart and this section must submit a ballast water report to the National Ballast Information Clearinghouse (NBIC) by electronic ballast water report format using methods specified at NBIC's Web site at. The ballast water report will include the information listed in paragraph (c) of this section and must be submitted as follows: (1)(i) Submit a ballast water report at least 24 hours before the vessel arrives in Montreal, Quebec.
(ii)Non-U.S. and non-Canadian flag vessels may complete the St. Lawrence Seaway Ballast Water Reporting Form and submit it in accordance with the applicable Seaway notice as an alternative to this requirement. (2)Submit the ballast water report at least 24 hours before the vessel enters New York, NY. (3)Submit the ballast water report no later than 6 hours after arrival at the port or place of destination, or prior to departure from that port or place of destination, whichever is earlier.
(c)The ballast water report required by paragraph (b) of this section must include the following information: (1)This includes the vessel's name, International Maritime Organization (IMO) number or other vessel identification number if an IMO number is not issued, country of registry, owner or operator, type and tonnage. (2)This includes the port and date of arrival, name and contact information of the person submitting the form, last port and country of call, and next port and country of call. (3)This includes the vessel's total ballast water capacity, total number of ballast water tanks, total volume of ballast water onboard, total number of ballast water tanks in ballast, and the identification of ballast water management method used. (4)Include the following for each tank discharged:
(i)The numerical designation, type and capacity of the ballast tank.
(ii)The source of the ballast water. This includes date(s), location(s), and volume(s). If a tank has undergone ballast water exchange, provide the loading port of the ballast water that was discharged during the exchange.
(iii)The date(s), starting location(s), ending location(s), volume(s), and method(s) of ballast water management.
(iv)The date(s), location(s), and volume(s) of any ballast water discharged into the waters of the United States or to a reception facility. (5)Include the name and title of the individual (master, owner, operator, agent, person in charge) attesting to the accuracy of the information provided and that the activities were in accordance with the ballast water management plan required by § 151.2050(g). If exceptional circumstances required deviation from the plan, the details surrounding the need for deviation and associated actions must be explained.
(d)If the information submitted in accordance with paragraph (c) of this section changes, the master, owner, operator, agent, or person in charge of the vessel must submit an amended report before the vessel departs the waters of the United States or not later than 24 hours after departure from the port or place, whichever is earlier. [USCG-2001-10486, 77 FR 17306, Mar. 23, 2012, as amended by USCG-2012-0924, 80 FR 73114, Nov. 24, 2015; USCG-2018-0245, 83 FR 47292, Sept. 19, 2018]
(a)Ballast water reporting requirements exist for each vessel subject to this subpart bound for ports or places of the United States regardless of whether a vessel operated outside of the Exclusive Economic Zone (EEZ), unless exempted in § 151.2015 of this subpart.
(b)The master, owner, operator, agent, or person in charge of a vessel subject to this subpart and this section must submit a ballast water report to the National Ballast Information Clearinghouse (NBIC) by electronic ballast water report format using methods specified at NBIC's Web site at. The ballast water report will include the information listed in paragraph (c) of this section and must be submitted as follows: (1)(i) Submit a ballast water report at least 24 hours before the vessel arrives in Montreal, Quebec.
(ii)Non-U.S. and non-Canadian flag vessels may complete the St. Lawrence Seaway Ballast Water Reporting Form and submit it in accordance with the applicable Seaway notice as an alternative to this requirement. (2)Submit the ballast water report at least 24 hours before the vessel enters New York, NY. (3)Submit the ballast water report no later than 6 hours after arrival at the port or place of destination, or prior to departure from that port or place of destination, whichever is earlier.
(c)The ballast water report required by paragraph (b) of this section must include the following information: (1)This includes the vessel's name, International Maritime Organization (IMO) number or other vessel identification number if an IMO number is not issued, country of registry, owner or operator, type and tonnage. (2)This includes the port and date of arrival, name and contact information of the person submitting the form, last port and country of call, and next port and country of call. (3)This includes the vessel's total ballast water capacity, total number of ballast water tanks, total volume of ballast water onboard, total number of ballast water tanks in ballast, and the identification of ballast water management method used. (4)Include the following for each tank discharged:
(i)The numerical designation, type and capacity of the ballast tank.
(ii)The source of the ballast water. This includes date(s), location(s), and volume(s). If a tank has undergone ballast water exchange, provide the loading port of the ballast water that was discharged during the exchange.
(iii)The date(s), starting location(s), ending location(s), volume(s), and method(s) of ballast water management.
(iv)The date(s), location(s), and volume(s) of any ballast water discharged into the waters of the United States or to a reception facility. (5)Include the name and title of the individual (master, owner, operator, agent, person in charge) attesting to the accuracy of the information provided and that the activities were in accordance with the ballast water management plan required by § 151.2050(g). If exceptional circumstances required deviation from the plan, the details surrounding the need for deviation and associated actions must be explained.
(d)If the information submitted in accordance with paragraph (c) of this section changes, the master, owner, operator, agent, or person in charge of the vessel must submit an amended report before the vessel departs the waters of the United States or not later than 24 hours after departure from the port or place, whichever is earlier. [USCG-2001-10486, 77 FR 17306, Mar. 23, 2012, as amended by USCG-2012-0924, 80 FR 73114, Nov. 24, 2015; USCG-2018-0245, 83 FR 47292, Sept. 19, 2018]